Tržní ceny komoditních plastů týdně

Uvádíme zde tržní ceny různých typů komoditních plastů PE-LD, PE-HD, PP a PS ve střední a východní Evropě se zpožděním 5 týdnů. Údaje zpracoval náš partner myCEPPI.
Zajímají Vás aktuální ceny komoditních plastů? Objednejte si tuto službu Týdenní ceny komoditních plastů u nás v redakci.

Ceny na týden 48/2019

The following factors  influenced “commodity” polymer prices and price expectations last week:

  • BRENT oil price 63.97 USD/barrel, increasing prices,
  • EUR/USD: 1,1047, a stagnant Euro
  • NAPHTHA (European): 529.93 USD/t, further increasing prices
  • According to polymer producers, November demand is average or slightly better,
  • Import from outside of Europe is low.
  • Spot markets seem to stand still,

Is it even lower? Most converters expect further polymer price cuts in December. Moreover, most of the players in the market. However, a 7-9% rise in the prices of feedstocks - crude oil and NAPHTHA - suggests the opposite. If oil and NAPHTHA prices remain at this level, a slight increase in monomer prices of EUR 0-20 may be envisaged. (It is important to note that there is one week left in the month and the price of these feedstocks may fall back. Thus, a decrease in the monomer price is not excluded.)

The question is how do polymer producers react to a possible increase in monomer prices? 

Let's see the facts:

  • By the last week of November, Central European producers had sold almost everything. Their November closing stocks are low. As a result, they will have less selling pressure in December. In addition, a small increase in inventory levels is possible.
  • Current margins are extremely low. Polyethylene grades can practically only be sold  close to the monomer price and LDPE can only be sold below that. Prices below € 900 are not a realistic option for Central European polymer producers. There is a lot of pressure to increase the margins, but at least keep their level. Thus, in case of a possible monomer price increase to increase prices.
  • The current price level is no longer attractive to suppliers outside Europe. Thus, there is little import in both European and Central European markets. This seems to be contradicted by the fact that many offers are circulating in the market, but there are no significant quantities behind them. There are only a few items in the traders' warehouses.
  • The weak euro does not support imports. Thus, no major import shipments are expected in the next 2 months.
  • The current "weak demand" is due to the confidence of converters in the long-term supply. Thanks to new North American and Russian capacities. And there is a general lack of confidence in the development of the European economy. The consequence of 'weak demand' is supply which appears to be plentiful. They are unlikely to increase their stocks in December.
  • The broad supply is backed by an increase in the number of sellers. But this is not proportional to the increase in supply. Due to the virtual supply, the large number of sellers and the increasing communication, converters feel that the market is saturated with feedstock.
  • December is a 3-week month. Demand will stop on 20th and will only resume on 6th January.

With all this in mind, with the very conceivable monomer price increase, no polymer price increase is expected. It is more likely that there will be a polyolefin roll over compared to current mid-range prices. Thus, the polyolefin price level below EUR 900 is once again inaccessible.

And the reduction of butadiene by EUR 50 adds to the doubt. This also predicts a possible further decline in SM prices. Imports outside Europe are also low on the PS market. However, demand will not be too strong in December. Thus, producers will have to consider the extent to which they anticipate an SM price drop. Are the full price reductions passed on to converters?


POLYOLEFIN GRADES

LDPE prices were in a range of  910-980 €/t last week in Central Europe. The cheapest prices on the spot markets were in the range of 900-930 €. However, spot market demand was low. Not many transactions occurred. Converters expect further price reductions in December, which manufacturers will also grant if monomer prices fall. However, in the case of a monomer price increase, roll over is likely.

Typical HDPE prices were in a range of 910 - 1,020 €/t in Central Europe last week. Demand is weak for all grades. There is a seemingly large supply, and in many cases this discourages customers from buying. Another important factor is that packaging users are also cautious about minimizing their inventory levels, fearing that the European recession will unfold. Last week's trading price ranges were as follows

  • HDPE BM 920-980 €/t,
  • HDPE IM prices 930-1,020 €/t,
  • HDPE FILM grades 910-990 €/t,

There are few non-European imported products on the market. In many cases, although cheaper, converters feel that now is not the time to try new products.

Typical HDPE (100) prices were in a range of 1,160-1,200 €/t last week. Prices have not changed. Demand is expected to pick up from late January.

LLDPE C4 prices were in a range of 920-1,000 €/t last week, depending on the grade and application area. Prices did not change, but supply weakened as the euro weakened. Smaller buyers see a price increase of around € 10. Prices are likely to increase slightly in the coming weeks.

mLLDPE (C6) prices were in a range of 1,020-1,160 €/t last week. There is a slight oversupply on the market.

Typical PPH Raffia  prices were in a range of 920-1,030 €/t last week. Demand by manufacturers and end users has picked up. However, distributors are still not competitive enough. Spot markets have also stopped. Buyers expect price drop in December. But in the event of a monomer price increase, polymer prices are also likely to rise. Especially in the lower price ranges.

The price of PPM IM products with medium melt index was in a range of 920-1,020 €/t last week. Prices have not changed compared to the previous week. The price of products with high flow index  was in a range of € 1,020 - € 1,080/t. Demand is low. But the polymer producers also sold their production. Prices are likely to have now reached their 2019 lows. Thus, a possible monomer price increase could also lead to a smaller polymer price increase in December.

Typical PPC prices ranged from 1,080 to 1,160 €/t in Central Europe. They did not change compared to last week. Demand by converters is weak. End of season. Very few transactions were made in the market.

PPR prices were on the average in a range of 1,120-1,220 €/t last week, they did not change compared to last week. Weak demand will continue in December.

The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):

Grade nameTypical polymer price ranges in the third week of November 2019, Central Europe (€/ton)
HDPE BM920-1030
HDPE Film910-1050
HDPE IM930-1050
HDPE Pipe (100)1160-1200
LDPE Film900-980
LDPE GP900-980
LLDPE C4920-1000
mLLDPE C61020-1160
PPC1080-1160
PPH IM930-1050
PPH IM HMFR1020-1080
PPH Raffia920-1030
PPR1120-1220
GPPS1100-1180
HIPS1120-1230
EPS1080-1130
ABS1350-1570


POLYSTYRENE GRADES

Typical EPS prices were in a range of 1,080-1,130 €/t last week. Partly due to the weather and partly due to the end of the season, there have been few transactions in the past week. By December, we expect falling prices and even weaker demand.

Typical GPPS prices were in a range of 1,100-1,180 €/t, while HIPS prices were in a range of 1,120-1,230 €/t. Demand is on average. Due to the strong dollar, there is hardly any PS from outside of Europe on the market. However, by December, we expect very weak demand and, consequently, falling prices. Provided the price of the SM decreases as expected.

Typical ABS prices have been in the range of 1,350-1,500 € over the past week. Demand is weak, partly due to the downturn in the automotive industry and partly due to inventory optimization. There are also fewer Asian imports on the market. As a result, oversupply has slightly decreased.

TypCena
HDPE blow molding989 € / t
HDPE film988 € / t
HDPE injection molding1000 € / t
HDPE pipe (100)1189 € / t
LDPE film953 € / t
LDPE general purpose953 € / t
PP co-polymer injection molding1151 € / t
PP homo-polymer fiber979 € / t
PP homo-polymer injection molding995 € / t
PPR1173 € / t
GPPS1131 € / t
HIPS1187 € / t
EPS1114 € / t

myCEPPI - nový přístup v poradenství a ve zpravodajství v oblasti plastů. Poskytneme Vám detailní, aktuální a na míru vytvořený obraz o trhu s plasty ve střední a východní Evropě.

Vycházíme z našich osobních a pevných vztahů s významnými hráči v plastikářském průmyslu ve střední a východní Evropě. Každý měsíc provádíme stovky osobních a telefonických hovorů se zpracovateli plastů, distributory a výrobci surovin, účastníme se odborných veletrhů a konferencí.

Informace, které shromažďujeme v rámci tohoto procesu, tvoří základ našich týdenních cenových reportů komoditních plastů. Obsahují také analýzu trhu. Tyto reporty také slouží jako výchozí bod pro naše další konzultační služby které poskytujeme společnostem, které potřebují pomoc při vstupu na trh, případně při rozšiřování svého byznysu, chtějí se orientovat v situací na trhu, atd. Naši odborníci mají desítky let zkušeností s plasty.

Rádi Vám poskytneme naše služby.

 

Nejnovější inzeráty

Nejbližší výstavy a semináře

Plastikářský slovník