Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 43/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 59.91 USD / barrel, stagnant prices
- EUR/USD: 1.159, further strengthening of the Euro
- NAPHTHA (European): 485.00 USD/t, stagnating prices,
- October contract monomer prices:
- Until the end of October in force majeure at the PP4 plant of MOL Petrochemical Ltd.
Demand compared to previous years was weaker than usual in October. This is now the focus of the market, especially for polymer producers and traders. The reasons are complex. One of them is the "K" Plastic Trade Fair and Trade Fair in Düsseldorf. It is customary for purchases to “stop” for 2 weeks every three years in the middle of October. A significant number of converters travel to Düsseldorf to look for new, favorable purchasing opportunities. Most of them were successful. There has never been such a wide selection of feedstock. And it's never been so good to bargain on prices. Another reason for the weak demand is that a significant number of converters think that no price increase is expected this year. Therefore, it is not too much of a risk to reduce the stock levels so far held high. So they buy less than usual and try to process their inventory. Demand for finished plastic products is also weaker than usual. The reason for this is that due to the EU Circular Economy regulations expected by 2020, packaging users will also seek to minimize their year-end inventory. Polymer producers are also trying to minimize their end-of-year inventories. It is not yet clear what the year 2020 will bring to plastic converters. So the best strategy seems to be to avoid the usual sales and inventory pressures at the end of the year. The question is right: if both feedstock producers and converters start the New Year with low stocks, will any unexpected event: a major malfunction or hurricane in the Gulf of Mexico not trigger panic in procurement? In the Central European plastics industry, growth is expected to slow rather than a general decline in demand.
The strengthening of the euro is slowly bringing cargos to Europe as well. And the wide supply keeps prices low. In the case of polystyrene producers, it is true that they are trying to reduce their inventories by the end of the year. They try to sell everything they produce. And the pressure to sell is high.
Polyolefin grades
LDPE prices were in a range of 930-1,020 €/t last week. Demand is low. Prices have not changed. Cheapest prices in the southern region: 940-1,000 €/t. In the central region and Poland, typical prices are between € 950 and € 1,020 / t, with a minimal decrease of € 5-10. Supply is broad, especially from the simpler film grades. Market players do not expect price increases.
Typical HDPE prices were in a range of 940 - 1,110 €/t in Central Europe last week. Central European producers typically sold their production. Supply by traders and distributors is broad. However, now few want to buy for the reasons mentioned above.
Typical HDPE BM list prices in Central Europe were in a range of 940-1,080 €/t last week. The cheapest prices in the southern region are from the Serbian HDPE producer. In Poland and the Central Region, traders and distributors offer their materials for less than €1,000. Polymer producers tend to be priced above 1,000 EUR. Most transactions were made in a price range of 980-1,060 €/t. Market players do not expect price increases in November.
Typical HDPE IM prices were in a range of 970 - 1,070 €/t in Central Europe. They did not change compared to last week. Demand in spot markets is weak.
HDPE Film grade prices were in a range of 940-1,110 €/t in Central-Europe last week. They did not change compared to last week. Demand in spot markets is weak.
Typical HDPE (100) prices were in a range of 1,220-1,300 €/t last week. Prices have not changed. The construction season is coming to an end. Thus, no price increase is expected next month.
The typical LLDPE C4 prices were in a range of 960-1,040 €/t last week, depending on the grade and application area. They have clearly risen, even in Romania. Due to the narrowing supply.
mLLDPE (C6) prices were in a range of 1,050-1,220 €/t last week. There was no change compared to last week. Most transactions happened in the range of 1,085-1,165 €/t. Price increase is unlikely in November.
Typical PPH Raffia prices were in a range of 970-1,080 €/t. There was a slight increase of 10-15 €. And as cheaper items run out, a small price increase is still possible in the last two weeks of October. However, the November price increase is also unlikely.
The prices of non-specialty PPH IM grades have risen slightly between 990 and 1,110 €/t, while those of high melt index grades have risen slightly in a range of 1,065 - 1,180 €/t. Further price increases are unlikely for the rest of October or even in November.
Typical prices PPC prices ranged from 1,100 to 1,240 €/t in Central Europe. The supply is generally good. Some common copolymers are missing due to MOL force majeure. We do not expect price increases.
PPR prices were in the range of 1,150-1,280 €/t. Supply is usually wide. However, demand is weak, especially for tube types. No price increase is expected next month.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the third week of October 2019, Central Europe (€/ton) |
HDPE BM | 940-1080 |
HDPE Film | 940-1110 |
HDPE IM | 970-1070 |
HDPE Pipe (100) | 1220-1310 |
LDPE Film | 930-1040 |
LDPE GP | 930-1040 |
LLDPE C4 | 960-1040 |
mLLDPE C6 | 1050-1220 |
PPC | 1110-1240 |
PPH IM | 990-1110 |
PPH IM HMFR | 1050-1180 |
PPH Raffia | 960-1080 |
PPR | 1150-1280 |
GPPS | 1100-1220 |
HIPS | 1195-1310 |
EPS | 1150-1200 |
ABS | 1430-1590 |
Polystyrene grades
Typical EPS prices were in a range of 1,150-1,200 €/t last week. The insulation season is at its peak. Most of the polymer producers sold their production. If demand persists in November, a relative rise in prices relative to the SM could be possible.
Typical GPPS prices were in a range of 1,100-1,220 €/t, while HIPS prices were in a range of 1,195-1,310 €/t. The expansion of the GPPS price band is driven by the influx of imports, mainly from Iran. Which is available in the southern region.
ABS prices are still in a price range of 1,430-1,590 €. Demand is weak due to declining automotive use. This results in traders and even producers trying to dispose of their stocks. As a result, the lower price range of the market is opaque.
Typ | Cena |
---|---|
HDPE blow molding | 1029 € / t |
HDPE film | 1037 € / t |
HDPE injection molding | 1030 € / t |
HDPE pipe (100) | 1250 € / t |
LDPE film | 977 € / t |
LDPE general purpose | 980 € / t |
PP co-polymer injection molding | 1182 € / t |
PP homo-polymer fiber | 1021 € / t |
PP homo-polymer injection molding | 1055 € / t |
PPR | 1215 € / t |
GPPS | 1177 € / t |
HIPS | 1250 € / t |
EPS | 1191 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
05.03.2024 | ID: 202418726
Top inzerát -
26.04.2024 | ID: 202419032
Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
26.04.2024 | ID: 202419032
Kúpim: Balíková LDPE fólia ,500 t/mesiac
22.04.2024 | ID: 202419013
Kúpim: Špinavý zvyškový granulát z podláh
22.04.2024 | ID: 202419011
-
17.04.2024 | ID: 202418988
Kúpim: POM drť farebná, biela, natur
17.04.2024 | ID: 202418986
-
11.04.2024 | ID: 202418943
Kúpim: PET odrezky z výroby, tácky, iba transparent
10.04.2024 | ID: 202418939
Kúpim: PA6.6 GF25, TECHNYL A218, originál
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
05.03.2024 | ID: 202418726
Top inzerát Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
Predám: HDPE fólia v rolkách 30 t
22.04.2024 | ID: 202419021
Predám: PA 6.6 Ultramid A3U42G6 drť
22.04.2024 | ID: 202419020
Najbližšie výstavy
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
07.05.2024 - 10.05.2024 | Budapešť
07.05.2024 - 10.05.2024 | Budapest
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB - Bukurešť 2024
14.05.2024 - 17.05.2024 | Bukurešť
23.04.2024
23.04.2024
23.04.2024
23.04.2024
06.05.2024
23.04.2024
Mitsubishi Electric organizuje Inžiniersky workshop: Využitie prediktívnej údržby v pohonoch
23.04.2024
Vstrekovanie plastov pre netechnológov
24.04.2024
Školenie - Konštruktér plastových dielov
25.04.2024
Vtokové systémy vstrekovacích foriem, organizovaný spoločnosťou Plasty Gabriel s.r.o.
25.04.2024
Ponuky práce
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024
Supervisor logistiky, skladu a expedície - KNP s.r.o.
09.04.2024
Skladník - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Obchodný zástupca / špecialista predaja - Plastcom, spol. s r.o.
04.04.2024
Údržba a obsluha chodu výrobnej linky - Plastcom, spol. s r.o.
04.04.2024
Technik kontroly kvality - ESOX-PLAST s.r.o.
04.04.2024
Majster odborného výcviku - ESOX-PLAST s.r.o.
04.04.2024
Manažér obchodu - Ecocycle s.r.o
25.03.2024